https://www.repairmywindowsanddoors.co.uk/birmingham-bifold-door-repairs-near-me/ Repairing Bifold Doors The hardware that is used to hold the bifold doors together can deteriorate over time. Cleaning and lubricating the mechanism (including the locks) will ensure that they run smoothly and efficiently. Most of the time, the issue is something small that can be easily fixed. This guide will show how to fix your bifold door when it becomes difficult to open or close. Cracked Pivot Pins A bifold door is made up of a pair of panels that slide along track that is installed in the head and side jambs or floor. They pivot on pins that are installed in the corners of the panel closest to the frame, and a guide is installed on top of the other panel to move it along the track. If your bifold is sagging or rattling, you may require replacing the pivot pin or anchor. The pivot pins of bifolding doors are joined to the track via brackets that are fixed into the side jamb, as well as the headjamb or floor. The bottom bracket features a notch that can be adjusted to alter the angle between the door and the floor or jamb. Sometimes the pivot pins break or crack. This is usually due to the force of twisting applied to the pivot pin during the movement of long logs using the help of a track loader or grapple. The majority of the time, this issue can be resolved by loosening the set screws on the bracket's bottom and then raising the door slightly. This will make the door edge parallel to the frame, and remove the scrape. It is not unusual to find the pivot pin that is the primary one on a bifold door cracked or broken. The reason for this is that the pin is exposed to much more pressure and twisting than a coupler or thumb. This is especially true for older pins that are made of soft materials. If the pin is damaged you can take it off from the door by squeezing it out using an flat-headed screwdriver or pliers. After cleaning the coupler or thumb, replace it with a new pin. Use a