Subaru Impreza Key Problems Subaru Impreza keys enable owners to lock and unlock their vehicle by simply pressing one button. The most common cause for the key fob to stop working is a dead coin battery inside the key fob. It is simple to change the battery. First find the small piece that contains the flat round battery in the key encasement. Replace the battery by opening the case and ensuring that the right side of the battery is facing upwards. Lost or Stolen Keys We've been there before when you reach into your pocket to retrieve your keys and they're nowhere to be found. Fortunately, it's usually not too hard to find your Subaru keys, and there are several ways to get them replaced quickly and at a low cost. If you have a standard metal key you can bring it to a hardware shop or locksmith that stocks Subaru blanks (these are typically marked with "Subaru") and get them duplicated. If you need to replace the battery on the key fob, you can find a CR-2032 in the majority of hardware stores, or online retailers such as Amazon. You'll need to visit a Subaru dealer or a locksmith for your car to program new keys. The cost is between $50-$250, based on if your Subaru is equipped with a transponder, or smart key. To have a new key programmed, you'll need to give the locksmith or dealership your vehicle identification number (VIN) that is located on the dashboard, near the windshield. They'll need this number to verify that your car is covered by warranty and that the new key is coded to match the specific model and year of your Subaru. The VIN also includes information on the manufacturer, where the car was built, and if it has any special features, such as an immobilizer that stops the engine from running if the wrong key is used. Key fob in error There are a variety of reasons why the key fob isn't functioning properly. It could be as simple as a problem with the battery or a more complicated repair. A dead battery, programming problems in the car or electrical issues with the vehicle are some of the most common problems with a Subaru keyfob. The battery in the key fob is able to be replaced quickly. They are readily available at hardware stores and some big box retailers. These cost around $10 each and can be replaced in a couple of moments. How to do this is included in the owner's instruction. There are also many YouTube videos that will walk you through the procedure. Another possible cause could be water damage to the key fob. It is possible that taking it out of your pocket and getting it wet could affect the retaining clips made of steel that keep the battery in place. If the key fob still experiencing issues after replacing the battery, the issue could be related to the circuit board of the transmitter or other parts in the vehicle. A skilled technician can look at these and then troubleshoot the vehicle to identify the problem. They can reprogramme your key fob to ensure it is compatible with your vehicle. They can also check if there are any antenna or wiring issues that stop the key fob from sending signals in a correct manner. Unlocking or locking issues There are a variety of possible causes of your Subaru Impreza's keys not locking or unlocking the doors. A dead coin battery on the key fob, a malfunctioning receiver module, water damage, signal interference or a paired key that needs reprogramming are all possible causes of this issue. To fix this, you can visit an expert locksmith or dealer to get the key fob reprogrammed. If https://www.g28carkeys.co.uk/subaru-car-key-replacements-near-me/ to open the trunk, it's likely that the lock setting on the key fob is set to "on". This is a security feature that stops thieves from taking your car. You can alter the lock/unlock settings for your trunk by making contact with your SUBARU dealer. Another cause of a locked steering wheel is when you make a sharp turn and the car locks itself automatically. This happens when the vehicle detects the suddenness of a turn. It can affect the transmission system as well as engine. When turning, slow down to avoid this. Be sure to verify that the replacement keys or the spare key you have is properly cut and programmed by the dealer or locksmith. Make sure that the emergency key can work on the trunk as well as any door cylinders since it is the only way to get back into your car if you are locked out. Make sure that the spare or new key does not have any marks or scratches on it. Keyless Entry Many Subaru models are equipped with keyless entry that allows you to lock and unlock trunk and doors at the press of a button on your remote. The system uses a radio signal to connect with the vehicle once you are within distance. There are numerous different systems that offer this functionality. They range from basic systems that open only the driver's door, to more sophisticated ones that support remote starting and smartphone connectivity. Keyless entry on your Subaru is convenient and secure However, it's essential to know what to do in the event that the buttons don't function properly. You can do some troubleshooting at home, but you might require taking your Subaru to a specialist for diagnosis. Use these suggestions to keep your remote control working as it should. If the fob on the key of your Subaru is wet the fob should be cleaned using isopropyl. Then, let it completely dry before installing the battery. Doing this regularly will prevent moisture from damaging the fob and causing further issues in the future. If your key fob isn't responding, you can switch off the engine by opening the driver's door. Press the button for the door to unlock, close it by pressing the button a specific number of times (usually one for each digit) until you hear an emitted sound. Repeat the procedure for each door until all doors respond.