https://anotepad.com/notes/nmtqijqt Repairing the Bottom of a Bifold Door They're a great way to save space, but they can be a hassle when they start to slide and scrape the floor. The good news is that these problems are usually fixable by making a few minor adjustments. If your bifold doors scrape on the floor, it is likely because of a damaged track or worn roller. The solution is to replace the damaged rollers. Bottom pivot As time passes, the bottom pivot of a bifold door could loosen or even fall out. This usually happens due to cracks or breaks in the wood piece that is where the anchor and pivot pin sits. If you're experiencing this problem it is crucial to replace the pivot pin or anchor. This will ensure that the door is opened and closed correctly. You may need a screwdriver to pry the anchor and pin. After replacing the pivot pin, be sure that the wood pieces are securely fastened and that the hole is the correct size for the new pivot. Sometimes, the bottom of the bifold door may scrape the floor. This can be caused by carpeting, or by altering the flooring material. Fortunately, this can be easily fixed by using some simple techniques. You can, for example raise the door's bottom to let the carpet clear. To do this, loosen the pivot bolts by shifting them either inwards or outward. You can also adjust the top set screw to align the door with the frame. A sliding or sagging bifold doors isn't just an eye-sore and a nuisance, but it could be a security risk. It is recommended to fix this issue as soon as it arises to prevent further damage. In many instances it can be fixed by simply loosening the top set screws of the pivot bracket, and then tightening the screws. However, this procedure could take a long time and therefore it's a good idea to have some tools in your arsenal to complete the task quickly. This bifold closet door that is adjustable at the bottom pivot is fitted with a threaded bar and a tooth-lock washer and nylon bushing. It also include