https://www.adledlights.com/cob-led-strip.html LED tape lights are a popular lighting device that can be used in homes, commercial and industrial locations. The advantages of LED light strips are that they are really energy-saving, long-lasting, high-brightness, abundant colors, easy to set up, and so on. However, after you buy an LED strip, you might find that it is too long and needs to be cut. So, LED strip lights how to cut? Cut LED strip is easy, but you require to pay attention to some details. You need to use the right tools, cut in the best location, link the ideal wire port, and test whether the LED strip lighting is working appropriately. If you can cut LED strip light correctly, then you can delight in the beauty and usefulness it brings. Whether it is a COB LED strip lights or smd LED light strip, the cutting technique is the exact same. Here are the actions of LED strip lights you can cut: Discover the cutting mark: Most LED tape lighting will have a mark, usually 2 parallel lines. You need to identify the length you desire to cut. You can use a ruler to measure the length you require, and then use a cutting knife to cut to size LED light strips Prepare tools: You will require - a pair of scissors, a cutting knife, - a pair of pliers, a ruler and some wire adapters. These tools can assist you cutting an LED strip and connect them to the power supply. Shut off LED transformer: Before cutting, make sure the LED strips are powered off to prevent unexpected short circuits or electrical shocks. Cutting LED strip: Carefully cutting LED strip lights at the markings and try to keep the cutting surface flat. Please note that you can only cut at the locations marked with the "Cut" indication on the LED strip lights. If you cut at the wrong location, it may damage the flexible LED strips. Manage the cut ports: If you require to link a brand-new led strip or wiring, use the proper adapter or solder to handle the cut ports and ensure a protected connection. You need