https://www.selleckchem.com/ Benzosultams represent one category of multi-heteroatom heterocyclic scaffolds, which have been frequently found in pharmaceuticals, agricultural agents, and chiral catalysts. Given the diversely significant functions of these compounds in organic and medicinal chemistry, great efforts have been made to develop novel catalytic systems for the efficient construction of benzosultam motifs over the past decades. Herein, in this review, we mainly summarize the recent advances in the field of catalytic synthesis of benzosultams from 2017 to August of 2020, with an emphasis on the scopes and mechanisms of representative reactions.The effect of ultrasonic temperature on density, microstructure and mechanical properties of vacuum counter-pressure casting ZL114A alloy during solidification was investigated by optical microscopy (OM), scanning electron microscope (SEM) and a tensile test. The results show that compared with the traditional vacuum counter-pressure casting aluminum alloy, the primary phase and eutectic silicon of the alloy with ultrasonic treatment has been greatly refined due to the dendrites broken by ultrasonic vibration. However, the refining effect of ultrasonic treatment on vacuum counter-pressure casting aluminum alloy will be significantly affected by ultrasonic temperature. When the ultrasonic temperature increases from 680 °C to 720 °C, the primary phase is gradually refined, and the morphology of eutectic silicon also changes from coarse needle-like flakes to fine short rods. With a further increase in the ultrasonic temperature, the microstructure will coarse again. The tensile strength and elongation of vacuum counter-pressure casting ZL114A alloy increases first and then decreases with the increase of ultrasonic temperature. The optimal mechanical properties were achieved with tensile strength of 327 MPa and the elongation of 5.57% at ultrasonic temperature of 720 °C, which is 6.3% and 8.2%, respectively, higher than t