Why You Should Have More Than One SAAB Replacement Key A spare key can save you a lot of time and effort. It's crucial when your key fob suddenly stops working. The most common cause is a dead coin battery, but it can be a number of other things too. It could cost you around PS1500 to get a new car key from a dealer, and the work can take anywhere from 10 to 15 days. Transponder key A transponder key is a key for cars which has an electronic chip within the key fob. These chips communicate with the immobilizer of your vehicle using radio signals. They are designed to stop theft by making it more difficult for thieves to access your vehicle. A transponder key can aid in finding your stolen car. This is because, when you insert the key into the immobilizer it will send a signal via GPS to your vehicle. Many new cars come with a transponder keys, which is a valuable anti-theft device. Older cars might not come with these features. If your old car doesn't have a transponder key, you can still get one from an auto dealer. The cost of a brand new transponder key is typically much less than the price of a traditional "blade" key. You can buy keys online or at an auto dealer. The key needs to be programmed to be programmed, which can be done at a locksmith or at an authorized dealer. The process usually takes only a few minutes and costs only a fraction of the price you pay at the dealership. It's vital to keep a spare key in case you misplace your original key or in the event of an emergency. If you attempt to start your car without the key, it could cause damage to the ignition and stop it from working in the future. Key for Wired Saab owners should always have more than one key for their car. The dealer will require an instrument specifically designed to work on older vehicles. However you can make it yourself for less than 200 dollars if have the correct parts. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges. It is not unusual for the batteries in these remotes to fail over time. It is essential to replace them frequently and it's not a big task to do. All you need is a flathead screwdriver, and a bit of patience. Slide the screwdriver into the slot in the middle of the case and then gently open it. Once the case is split open, you are able to access the electronic components inside. The shift and space-bar keys are equipped with a copper wire underneath them that connects the pressure pad to electronics. It is crucial to remove the wire from the keys, as it can prevent the car from acknowledging the key. The wire is also used to connect the ignition to the key, so make sure you remove it prior to replacing the key. Remote key The 03-11 SAAB 9-3 is among the most beautiful automobiles on the market, but it can be an inconvenience to use. Key fobs can be a bit fragile and the buttons could become stuck. It is easy to replace the key case. To do so you'll require a new key and an extra case that you can buy at the majority of auto parts stores. Also, you'll need a small flathead screwdriver to remove electronics from the previous case. When you remove the electronic components, be sure to remove them carefully. They are easily damaged. Use the small flathead to split open the case after having removed the electronics. Be gentle and avoid damaging the plastic. After https://www.thekeylab.co.uk/saab-car-keys/ opened up the case, you'll have access to the battery and can take it out easily. Most used Saabs come with only one key. Adding a second key requires a computer module (often known as the CIM), a new key, as well as specialized programming to convince the car that you're not trying to take it away. Locksmiths are generally not willing to do this because it is too expensive. You can do it yourself, if you are resourceful and lucky enough to locate the proper components at a reasonable cost. Keyless entry No matter if your Saab has an alarm system or doesn't, it's a good idea have a spare key. It's easy to duplicate the traditional metal car keys but it's more difficult to steal a car with the newer keyfob-based security system. This is due to the fact that old-fashioned keys made of metal lack security features, while the modern ones do. The first step is to remove the emergency key. You'll need a screwdriver for this, so ensure that you have one. After you've removed your emergency key and the emergency key, you can use a flathead screwdriver to split the case open. This will let you look inside the battery, and replace it. Reassemble the keyfob following the installation of the new battery. Don't forget to align the various parts and the limiters, which hold the battery in place. After you've finished you can put the key in the ignition and resynchronize it with the car. Once that's done, you're good to go! This is a good method to save money while also keeping your vehicle secure. Make sure the battery replacement has the same type of label as the original one and is compatible. The key will not function properly if it's not the same model as the original.