Bi Fold Door Repairs If the hardware is damaged, it can make it difficult to operate bi-fold doors. The hinges at the top and bottom rollers are the most frequent components that are damaged and need servicing or replacing. The track of the door can be blocked by dirt and dust and can cause it to stick. It is easy to solve this problem by cleaning and taking out the dirt. Fixing the hinges Bi-fold doors are a great way to open the space. However, they don't have no problems. One of the most frequent issues is when hinges aren't aligned properly. This can cause the door to not close properly and may also make it difficult to lock. Call a professional if you have any of these problems. Ignoring a problem will only result in further damage and higher repair costs. It is essential to leave enough space to allow the hinges to function correctly when installing a bi-fold door. You should also check the installation manual for specifics, such as how much clearance is needed. Generally speaking, the hinges should be placed at least a half-inch from the wall to ensure they have sufficient clearance. If your bi-fold door is not closing correctly, it could be because the hinges aren't aligned correctly. This is a common issue, particularly if your doors were professionally installed. You can fix it by using a screwdriver to remove the anchors or pins that hold the hinge in place. After the anchor or pivot pins are removed they can be replaced with new ones that are slightly larger. Depending on the dimensions of the replacement pins you may have to drill a hole in the wood to accommodate them. Once the new pins are in place, you can replace the pivot or anchor pins and then test the door to ensure that it opens and closes properly. The pivot pin on the bottom may also shift in its location, causing bifold doors to fail. The weight of the doors is to blame. If you have a large number of glass sealed units the doors can slide down on the side, causing it be pushed against the fl