https://www.selleckchem.com/products/Dihydromyricetin-Ampeloptin.html Scalable centrifugal force made it possible to adjust the injection speed of the organic solvent into the aqueous solution in the DLLME step by changing the spin speed. Spin speed of 100 rpm was used in dispersion step and spin speed of 3500 rpm was used to sediment organic phase in DLLME step. The proposed device provides effective and reproducible extraction using a low volume of the sample solution. After optimization of the effective parameters, an EME-DLLME followed by GC-MS was performed for determination of amitriptyline and imipramine in saliva, urine, and blood plasma samples. The method provides extraction recoveries and preconcentration factors in the range of 43%-70.8% and 21.5-35.5 respectively. The detection limits less than 0.5 μg L-1 with the relative standard deviations of the analysis which were found in the range of 1.9%-3.5% (n = 5). The method is suitable for drug monitoring and analyzing biofluids containing low levels of the model analytes. Multi-target detection has been widely applied for the sensitive measurement of cancer-related biomarkers; however, the design and application of single platforms for diverse target detection are still challenging. Herein, a robust and sensitive electrochemiluminescence (ECL) biosensing platform was constructed for the measurement of microRNA-21 (miRNA-21) and mucin 1 (MUC1) based on dual catalytic hairpin assembly (DCHA). The catalytic hairpin assembly (CHA) process (Cycle I) was initiated by the target miRNA-21 to introduce abundant CdSMn quantum dots (CdSMn QDs) on the electrode surface, leading to a considerable ECL response and the sensitive detection of miRNA-21 with a limit of detection as low as 11 aM. Subsequently, the second CHA process (Cycle II) was triggered by the MUC1-aptamer complex, which allowed copious amounts of Au nanoparticles (AuNPs) to approach the CdSMn QDs. A decreased ECL signal was obtained due to the ECL reson