Replace Lock in UPVC Door A professional locksmith should be called when your door locks made of upvc aren't working correctly. They are quick, efficient and will complete the task to a high standard. Change the barrel lock of a Upvc barrel isn't a difficult task. You just need to know what you need to do and follow the steps below. Removing the Barrel Lock uPVC doors and windows are very common in a wide range of properties. They let light enter the home and can be opened with ease using the correct key. The process of changing the barrel on a uPVC door is a straightforward task that can be completed in just five minutes. If you've lost your keys, a tenant left and has not returned them or the barrel of your lock is damaged and needs to be replaced, this is an easy solution. The first thing you have to do is remove the screws that hold the handles. The handles will be removed of the way to allow access to the lock barrel screws. You should not loosen the screws quickly, as this can damage the handles. After the screws are removed, locate the screw that holds the lock in position on the inside of your door. It is a screw that stands out and is a different color than the other screws on the door. Take it off with a Phillips screwdriver. Take the key that you use to open the lock, and place it inside the barrel. Turn it as far to the right as you can. This should release the barrel and make it easier to pull out of the door. After loosening the screw, you are now able to break the pins that hold the Euro Cylinder in place. To do this, you will require pliers that are strong or mole grips. Take the protruding end of the euro cylinder and bend it up and down and side to side. This will break the two support pins that hold it in place. Once the old cylinder is out, you can then start the process of installing the new one. To ensure you purchase the correct replacement, first measure the lock cylinder. This can be done by measuring the distance from the center of the circular portion of the keyhole, to the center of the square spindle. The measurement should be taken from the upper spindle. Change the Cylinder The euro cylinder is the main locking mechanism for the door made of upvc. It is simple to replace and doesn't require a handyman or locksmith. In fact, if the lock you have isn't anti-snap, anti-bump or anti-sn is recommended to change it to one with this protection included. These are very inexpensive and can save you money and inconvenience if your locks have been damaged by these security threats. To start to begin, open the door and stand in front of it, so that you are able to reach the screw that holds the handle with your hand or an appropriate tool. Let it loosen a bit, maybe just one quarter turn to begin the process. After this is completed the cylinder should slide out easily since it will no longer be held in by the screw. The next step is to decide on the size of the replacement cylinder you need. There are about 25 different sizes. It is recommended to bring your old cylinder with you when purchasing a new one, so that you can be sure it will fit. If you're unsure of the dimensions, measure from the screw hole center to the end of the cylinder. You can only ensure that you are buying the right sized cylinders for your upvc door by measuring from the center of the screw hole to the end of the cylinder. Insert the new cylinder into your door in the opposite direction you removed the old one. It may be a little difficult to align the lock cam, but it is usually an issue with alignment, and will eventually be sorted out. The next step is to insert the long screws for securing. After that, you are able to test it to ensure that the cylinder is secure inside the door. You can now attach the handle back to the door and then test it again. If everything is working as it should your cylinder lock on your door made of upvc has been replaced and has added a layer of security to your home. Change the handle There are many reasons why the door knob or handle can become loose. It can be due either to the wear and tear of the handle or the spindle that is square inside the handle. In this case the door handle will need to be replaced. Firstly it is important to ensure that the door is propped open and won't close in between taking off and replacing the handle. Then, remove the screws from the inner side of the handle plate using the screwdriver. This will remove your handle from the plate. Be careful not to loose these screws as they will have to be re-screwed into place later. You can now take off the handles to get access to the cylinder lock inside the door. The lock will be a circular or bulb-shaped cylinder that is only found in multi-point locks used on upvc doors and some doors made of aluminum. Changing the cylinder is much like changing the handle. The only difference is that you'll need to remove the old cylinder from the door and replace it with a new one. When choosing the replacement handle, it is important to think about its size. The handle should be the same size as the one that came with it, because it must fit into the screws that hold the handle in place. You can start by consulting the table of sizes that lists the most common sizes of replacement handle plates and their keyhole centers. Consider upgrading your door handles made of upvc to a more secure standard, such as a Sold Secure SS301 set or 2* Kitemark security handles. This will increase the security of your house and make it easier to operate your door. These sets are slightly more expensive however the increased security and peace of mind is worth the cost. You don't want to push the door handle constantly upwards and downwards to open and close it. Change the Lock The security of your uPVC lock could be a vulnerable point for burglars. You might want to upgrade your uPVC door to a multipoint lock to increase the security. This will include an open hook as well as deadbolts to deter burglars. A professional locksmith can assist you with this, however it is also possible to complete the job yourself. The process is quick and easy. You'll only require some basic tools. The first step is to loosen the screws that hold in the handle. You can remove the screws using a screwdriver and put them in a secure place. Then, you lift the handle up to reveal the screw that holds the cylinder in its place. You can unscrew this screw and replace it with the new one. It is important to ensure that the screw is the same size as the original. It must be aligned correctly with the lock barrel. The process of changing the lock on your uPVC door could appear daunting. You rely on it to protect your home, and making mistakes could result in you not being able to unlock the door. If https://www.repairmywindowsanddoors.co.uk/sutton-window-lock-repairs-near-me/ know how to accomplish it, the procedure is fairly easy and costs much less than calling a locksmith. You'll need to take off the faceplate inside the lock to switch the lock. You will need to be able to see the screw that is located inside the door as well as the retaining bolt on the outside of the door. Once you have these screws in your hands, you can remove and replace the faceplate. There are several reasons why you may need to replace the lock on your uPVC doors. You might need to alter the lock on your uPVC doors for many reasons. Anyone with a basic level of DIY skills can replace the locking mechanism made of uPVC. You will need to inspect the hinges that are inside the mechanism, which could be a challenge when the lock is stuck. If the hinges are lubricated and are in good condition, it can be an easy fix. However, if you do not feel comfortable doing this, it is best to consult an expert.