How to Replace Door Locks It isn't easy to replace your door lock. It is crucial to secure your home from intruders. You should also replace your locks when you move in with new housemates, or if you rent your home. The majority of modern locks are designed to fit standard door widths. If your door is more thick, you will need a "thick-door" kit that has longer screws and longer tail pieces for the deadbolt. The old lock can be removed If you're replacing your door lock you must remove the old lock from the door. You can do this with a few simple tools, but be careful not to scratch the door or frame. Using the right tools will help you avoid costly repairs in the future. Begin by removing the screws that hold the handle and trim. This can be accomplished using the help of a screwdriver. Once the screws are removed, you can take off the trim. Then, you will be able to remove the screw that binds the handle and trim to the door. After removing screw then, you can take off lock cylinder and open handle. One of the most common indications that your lock is getting old is when you are unable to longer turn the key inside. This is due to the tumblers wearing out and eventually stopping moving upwards or downwards, which causes the lock to cease to function. You'll need to have the lock rekeyed by a locksmith if this occurs. Begin by removing the screws that hold the faceplate in place. If the kit you purchased does not come with new screws, you can purchase them at an hardware store. If you're installing a mortise lock you must also take out the screws that hold the external rose plate to the door. After removing the screws, remove the plate as well as the dead bolt. Next, search for a pinhole on the interior trim of the handle. If you find one, slip a straightened safety pin into it. You can also try using a flat screwdriver in a depression or slot. This should open the lock handle and expose screws that can be removed in order to remove the entire lock from the door. Installing the new lock If you're looking to replace your lock after a break-in or simply want to change the appearance of your door installing a new lock is relatively easy. It is important to measure the door in order to make sure you buy an appropriate lock that is the correct size for your door. This is especially important for deadbolt locks, which require a specific size to fit inside the strike pocket and bolt plate. If you're not sure of how to measure, ask for assistance at your local hardware store or locksmith. If you are replacing a mortice, use the existing centrerail as a guide to position the new mortise. Once you have marked the location of the lock, you'll need to drill holes along the central line of the same size as the lock. After that, chisel the wood away until you have an even rectangular space that will fit the mortice lock. Install the lock and then outline the faceplate using a marking blade. Mark and drill screw holes to secure the faceplate. You can save money on rekeying locks by purchasing a starter set that includes keys that can be re-keyed and a blank key. These kits are available from numerous online retailers, as well as home improvement and hardware stores. These kits also come with instructions to help you complete your project. Make sure to read your lease agreement if renting before changing locks. You might be required to give the landlord the key to the new locks. If so, you might be required to take out the old lock and replace it with a standard lock. You can buy a basic lock from the hardware store near you or you can buy an advanced lock that is connected to your home's WiFI network and allows you to lock and unlock your door from a distance. Schlage Smart Lock is compatible with all levers and knobs. This system can also be connected to your home security hub that is smart which allows you to receive alerts whenever your door is locked or opened. Installing the new lock A broken lock can be a security risk, therefore it is crucial to replace it as quickly as you can. Luckily, replacing locks for doors is a simple and quick project that anyone can do. The first step is to take the lock that was used to secure the door. https://www.repairmywindowsanddoors.co.uk/bristol-window-lock-repairs-near-me/ is accomplished by removing the screws that hold it in place and pulling it out. Depending on the type of lock you have, you might need an Allen wrench or a screwdriver. After you have removed the old lock, save all of the parts and put them in a safe location. Install the new lock on the door. Most kits include an image of a cardboard template that illustrates how the lock will fit onto the door. If the template doesn't match up with your door you can trace around it using a pencil or use a chisel to remove any extra material. After the new lock is in place, make sure the latch plate's interior is aligned with the mortise lockset hole for a secure fit. Be cautious not to tighten too much the lock when installing it. This could cause the lock to rattle, or even break. If you have a lock that's keyed, ensure that the spindle is in alignment with the hole on the knob. If it's not, you can use the screwdriver to push the lock into the knob. Once you have finished installing the new lock, you are now able to put in the decorative base plate that is included with it. If the lock does not include an appropriate base plate, you can purchase one that matches your hardware. The last step is to test the new lock to ensure it works. You can do this by inserting the key into the lock and turning it to make sure that it opens. If it fails, you should consider contacting locksmith. You can also stop burglaries by having a professional rekey your locks. This procedure involves changing the lock's internal tumblers to ensure that it will not accept your old keys. This will keep your home safe and give you peace of mind. Testing the new lock When you are installing a new lock, you want to make sure that it operates as intended. This is why it's crucial to follow the instructions carefully. If you don't, you may not be in a position to open your door. If you're not sure of what to do, seek out a professional locksmith assistance. A locksmith can give you advice on the best locks for your house. If you are having difficulty opening your lock, it could be an issue with the handle or latch. You can lubricate the latch with graphite or spray it with WD-40. This may solve the issue. You may have to replace the latch if the latch is not working properly. The lock could have been installed incorrectly. The inner door handle clip may be damaged or missing from the new lock. In this instance you need to grasp the handle from the inside and insert an additional plastic retainer clip. After that, you can connect the handle to the lock and test its operation. It's important to check the keypad after replacing your lock to ensure that it functions properly. You can test it by placing the key inside and turning it. If the keypad is functioning properly, your door should be able to unlock and lock. Check the deadbolt to make sure it's working correctly. If it's not working properly, remove the latch from the door and undo the Phillips-head screws. Replace the deadbolt that was installed with the new one. Orient and load the deadbolt lock properly. Spindle testing is an additional method to test a new lock. This can be done by inserting a screwdriver in the spindle. This test should be carried out prior to reinstalling a lock to ensure that there aren't any mistakes.