Add a Sparkle to Your Fiat 500 Key Fob These cute Silicone Covers can add a bit of excitement to your Fiat 500 Key fob. These covers are easy to put on and snap over your black cover. The silicone covers protect the keys from dust, splashes and other contaminants. They also make your keys look much more fashionable. The signals emitted by the remote control of your key are not hindered and work flawlessly even when the cover is in place. Protects your keys from splashes and dust This silicone cover will add a touch elegance to your key. It fits perfectly around the key fob, without loosing. It also protects your key from dust and splashes. The signals generated by your key remote are not affected by the silicone cover therefore you can use the buttons on your key fob as normal. Accessorize your Fiat 500 with these funky covers in Grey and Black. These covers are ideal when your original cover is looking a little worn, scratched or damaged. The covers are made from premium silicone and come with 2 key rings, so you can switch them out when you are bored with the same colour. These covers are designed to replace the black stock key cover that comes with your vehicle. You will need to remove the original key cover before installing the covers. Looks great Fiat is a distinct and renowned Italian brand and their cars are adorned with an incredible style that distinguishes them from the crowd. These stylish car key covers are a simple and enjoyable method to add a bit of glamour to your keys without becoming too overwhelming. They look stunning on your key fob, and can be used to revive the look of a worn-out key. The covers snap in the desired position and are designed to replace your black cover. It is a good idea to remove the old cover before installing this. They come in Grey and black, and the fiat logo is affixed to both. If you ever change your mind, you can always switch it up! They are also great gifts for Fiat 500 owners. Easy to install Fiat 500 key covers are an simple way to update your car keys. They are available in a variety of colors and styles, so you'll be able to find the right one that matches your personality. Installing them yourself is in just ten minutes. You'll need a screwdriver, and some patience. The first step is to remove the previous cover from your key. It must be removed before the new cover can be fitted. After removing the cover You can then use a flathead for prying the four major attachment clips off the passenger side of the fob assembly. These are highlighted in red on the picture below. Also, note the tabs for locating slots that are highlighted in yellow. They need to be disengaged also. After removing the battery, replace it with a new # CR2032 3 volt coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening in the fob, and that the -" negative side is facing the buttons made of rubber. Attach the mirror cover to the passenger side by aligning the locating tabs. After you have completed this, insert the fob for the driver side back in your vehicle and test it by pressing the push button on the front of the car key. If everything is working properly your car should start to turn on the parking lights and your doors will lock automatically. Easy to remove Fiat 500 Key Covers are a great way to freshen up your key fob. They are easy to install and have a distinct look. They guard your key fob against smudges, scratches and dirt. But, before you install a new cover for your key it is necessary to remove the original cover from your vehicle. You can accomplish this by pressing the "Fiat" red button on the front of your key fob. By pressing the button, you will release an lever that permits you to slide out the switch for ignition on your key (1). After removing the metal key, you will see a small silver round switch with images of an unlocked and locked padlock next to it. This is the battery switch for the key fob. It is easy to replace the battery by turning the switch a quarter turn using a small flathead screwsdriver. The key fob has a microchip inside that is used to communicate with the Body Control Module (BCM). When https://www.thekeylab.co.uk/fiat-car-keys/ insert your Fiat key it presses a button in the ignition switch. This is used to remind you of the "key-inignition". The BCM will then be capable of reading the transponder inside the key fob to verify that it's a valid. You can also add a sport design twin pack to your key covers to give it an original and fun look. The covers snap onto the original cover. They are available in Cream or Silver. The key cover will only work in conjunction with the original black cover is removed from your key fob.