https://jsfiddle.net/zephyrcod1/4xnghbtw/ Bi Fold Door Repairs If the hardware is damaged, it could make it difficult to operate bi-fold doors. The top hinges and bottom rollers are the most common components to become damaged and require maintenance or replacement. The track of the door can be blocked by dirt and dust, resulting in it sticking. It is easy to fix this problem by cleaning and removing the dirt. Fixing the hinges Bi-fold doors are ideal for opening the space. They also have their problems. One of the most frequent issues is when hinges aren't aligned properly. This can cause the door to not shut properly and also make it difficult to lock. Call a professional if you are experiencing any of these issues. Ignoring a problem will only cause further damage and more expensive repair costs. It is essential to leave enough space to enable the hinges to work properly when you install the bi-fold door. Refer to the installation manual to find out more about the amount of clearance you require. In general, hinges have to be at least a half-inch away from the wall to allow enough clearance. If your bi-fold door isn't closing properly, it could be because the hinges aren't aligned properly. This is a common problem, especially if the doors were installed by professionals. To resolve this issue it is possible to use a screwdriver and pliers to remove the anchors and pins that are holding the hinge in place. Once the anchor or pivot pins are removed they can be replaced with new ones that are slightly larger. Depending on the size of the replacement pins you may need to drill a hole in the wood to accommodate them. After the new pins are in place you can replace the pivot or anchor pins and test the door to make sure it is able to open and close properly. Another common problem that bifold doors might face is when the bottom pivot pin becomes loose in its seat. This happens because of the weight of the doors. If you have a large number of glass sealed units the doo