https://www.fireplacesandstove.com/categories/wood-burning-stoves The Benefits of a Woodburner Stove Wood stoves employ constant air flow to create fire and heat. The dampers are usually located in the stove's door. They allow fresh air to be drawn in. The exhaust gases are then drawn through a chimney and safely removed from your home. Modern wood stoves that do not have catalytic rely on secondary burning to make them efficient. However, they'll eventually create creosote if they are not properly used. Energy Efficiency Modern woodburner stoves are designed to maximize the efficiency of heating. The combustion process has been designed to burn wood as efficiently as is possible. This means a higher percentage of the fuel is converted into heat, and less goes to waste as gas or smoke. The BTU per hour is the most important factor to take into account when choosing a woodburner. This figure will give you an idea of the amount of heat the stove can produce and is an accurate gauge of its capability to effectively heat your home. It's important to compare wood stoves based on their combustion efficiency and heating efficiency. The efficiency of combustion is how much of the fuel is converted into useful heat, and the heating transfer efficiency measures how the stove is able to convert the heat into warm air inside your home. Stoves that have a catalytic combustion system can achieve high levels of efficiency because the combustor burns a portion of the gases that are released during the initial combustion. This helps reduce the amount of creosote that is flammable in the chimney and helps to clean the exhaust gases. Modern non-catalytical stoves remain highly efficient. However they tend to burn hotter and perform worse at low temperatures. It's worth bearing in mind that the efficiency of energy used by the stove is only as good as the quality and condition of the fuel used to power it. Dry and seasoned firewood is more suitable than green wood, as it contains more