Subaru Impreza Key Problems Subaru Impreza keys allow owners to lock or unlock their vehicle by simply pressing a button. A dead battery for the coin in the key fob is the most common reason for the key fob not to work. It is easy to replace the battery. First find the small device with the flat circular battery in the key encasement. Unlock it and replace it with the battery, making sure that the correct side is facing up. Keys stolen or lost We've been there before: you reach into your pocket to grab your keys but they're not to be found. It's not difficult to find your Subaru keys and there are several methods to replace them quickly and easily. If you have a regular metal key, you can bring it to a local hardware store or locksmith that has Subaru blanks (these are usually marked with "Subaru") and get them duplicated. You may need to replace the key fob battery as well in which case you'll want a CR-2032 replacement that can be found at many hardware stores, as well as some retailers like Amazon. For the key fob or the remote/intelligent key, you'll have to visit an auto locksmith that can program new keys to your Subaru model. The cost will range from $50-$250, depending on whether your Subaru features a transponder chip or smart key feature. To have a new key programmed, you'll need to give the locksmith or dealership your vehicle identification number (VIN) that is located on the dashboard, near the windshield. This number is required to confirm the warranty status of your car and ensure that the key has been correct for your Subaru model and year. The VIN provides details about the manufacturer and the place where the car was made. It also informs you what special features on the vehicle, such as immobilizers that stop the engine from starting in the event of a misplaced key being used. Key fob not working properly There are a variety of reasons why a key fob doesn't function properly. It could be a simple problem with the battery, or it could need a more complex fix. Some common issues with a Subaru key fob are batteries that have died and programming issues with the car, or other electrical issues in the vehicle. One of the most simple fixes is to replace the battery on the key fob. These can be found in a variety of big-box retailers as well as hardware stores. They are priced at around $10 and can be replaced in a few minutes. How to do this should be in the owner's handbook. YouTube has many videos that can guide you through the process. Water damage to the key fob is another possibility. The clips made of steel that hold the batteries in place could be damaged if you remove it from your pocket and get it wet. If the key fob has issues after replacing the batteries, the issue could be related to the transmitter or other parts of the vehicle. A technician with experience in troubleshooting the vehicle will investigate and pinpoint the issue. They can re-program the key fob and make sure that it is compatible with the vehicle. They can also look for any wiring or antenna issues that may prevent the key fob from transmitting signals correctly. Locking issues or unlocked locks There are a variety of possible reasons for your Subaru Impreza's key fob having trouble locking or unlocking the doors. This issue could be caused by a dead coin battery, a malfunctioning module and signal interference or water damage. To fix this issue, you can go to an authorized locksmith or a dealer to get the key fob reprogrammed. If you are unable to open the trunk the key fob could have the trunk lock setting set to "on". This is a security feature that stops thieves from taking your vehicle. You can change the setting for the trunk lock/unlock by calling your SUBARU dealer. Another reason for locking the steering wheel is when you make a sharp turn and the vehicle locks itself automatically. This happens when the vehicle detects a fast turn, which could impact its transmission system and engine. To prevent https://www.g28carkeys.co.uk/subaru-car-key-replacements-near-me/ from happening, it's a good idea to slow down when turning. Make sure you check that the replacement keys or spare key you have was properly cut and programmed by the dealer or locksmith. Also, make sure the emergency key is working on each of the door cylinders and trunk, because these are the only methods to gain access to the vehicle when locked out. Verify that the spare or the new key doesn't have any marks or scratches on it. Keyless Entry Many Subaru models are equipped with keyless entry. This allows you to lock or unlock the doors and trunk by pressing a button on the remote. The system works with an extremely short radio signal that communicates with the vehicle whenever you're within range of it. There are many different systems that provide this feature. They range from simple systems that open only the driver's door, to more sophisticated ones that support remote starting and connectivity to smartphones. The ability to use a keyless entry system on your Subaru is convenient and safe however, it's crucial to be aware of what to do if the buttons don't function properly. It's possible to troubleshoot at home, but you may have to bring your Subaru to a specialist for diagnosis. In the meantime, you can follow these tips to help keep your car's remote control working as it should. If your Subaru's key fob is wet, it's a great idea to wipe the electronic chip off it by using isopropyl ethanol and let it dry completely before you put the battery back in. Doing this regularly will prevent moisture from causing damage to the fob, and causing problems in the future. If your key fob has stopped responding, turn off the engine and then open the door for the driver. Press the button to open the door, then close it, pressing the button a particular number of times (usually one for each digit) until you hear an alarm sound. Repeat the process with each door until you get a response from all of them.