Door Handle Replacement It's worth replacing door handles if you don't like the way they look or if they are difficult to use. Installing a new door handle is simple if you've got patience. Modern door handles are usually equipped with cover plates which hide the screws, giving them an attractive appearance. However, you'll have to attach them separately if the new handle does not already have them. Removal of the old Handle The door handle isn't only a decoration for your home, but it's also a safety feature that allows you to lock and unlock your door. Over time the door handle can start to lose its grip or feel a bit loose. It could also appear old and worn. This is a sign that it's probably time for a replacement. If your door handle is becoming difficult to use, it may be time to replace it. This is a serious problem because you won't be capable of locking or unlocking the door and put your family and yourself at risk. Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle is dangerous, especially for elderly or children members who might struggle to open it. They could become trapped. It's simple to replace a broken handle on doors. Modern door handles are usually standard sizes and will fit any door. If you're not certain if your new door handle will work, remove the old one and measure the holes in its housing. This will help you to buy the right door handle. It is the easiest way to remove the door handle by removing it from the door. Usually it is a matter of using a screwdriver. Some door handles have an enclosure plate that hides the screws that mount them. You'll need to remove the cover plate to gain access to the screws. After you have removed the handle that was previously used, take note of the way the spindle is connected. This will aid in aligning the new handle. You can also remove the door handle by unscrewing the latch mechanism. This is usually done with an screwdriver however you'll need to locate the small latch, which is located on the edge of the trim piece. Once you've removed the latch, remove the handle from the strike plate, and then the latch off the door's edge. Removal of the Strike Plate You'll need to replace your latch plate after replacing the handle. This is the plate that holds the hole where the latch for the door is inserted when the door is closed. The packaging that the new handles are packaged with will offer two latch plates: either a rectangular or a circular one (see the above diagram that outlines the parts of the door handle). If your current latch plate is rectangular in shape, swap it to a round one, so that the latch hooks onto the strike plate in a way that makes the handle more comfortable to use. The first step is to remove the screw that is holding the old latch plate. The screws are often quite tight and require a fair amount of force to loosen them. It might be beneficial to have a second person assist in this area if it is possible. The latch plate should come out of the door once the screws have been removed. If the latch plate is stuck or doesn't move, use a small hammer to scrape the edges. This may help free the plate. You can now move on to preparing the new door strike plate for installation. Install the latch plate in the door jamb using the screws that came with your new handles. Don't over tighten your screws because this could cause damage to the strike plate. If you're not sure whether the latch plate is in its correct position, close and open the door to check whether it latches and closes properly. If it doesn't, you'll need to adjust the strike plate either up or down, or move it forward or back until the door closes and latches correctly. If the door is jiggling or moving, it may be necessary to expand the hole for the latch in the strike plate. This is more frequent with older doors, but could be due to wear and tear hinge mortises that are not deep enough or are not sized correctly for the latch, or due to a broken or damaged strike plate that is damaged or broken. If https://www.repairmywindowsanddoors.co.uk/reading-windowrepair/ is the case you can use a metal file instead of a chisel or hammer to adjust the strike plate. Removal of the Latch The latch is an angled metal piece that slides into and out of a hole on the inside of your door. The latch is pushed forward when you turn the handle. It also connects to an opening in the frame of the door to keep your door closed. If your door shakes when you close it, replacing the latch could be the only thing needed to fix the issue. It's difficult to identify the screws that hold the latch to the door, however there's usually a tiny slot on the trim plate that lets you to insert a screwdriver in order to pry it off. Once you've removed the trim plate, it should be simple to take off the latch as well as the bolts that keep the latch and spindle in place. If the latch isn't easily removed then use a paperclip tool to remove it from the handle mechanism. Insert the item into the latch's slot that is recessed and gently move it around until you feel the handle and latch start to split. It may take this several times before the latch comes loose enough to pull out. Once the old latch is removed it should be possible to insert the new latch into the slot with no issues. Make sure the latch is correctly positioned in the slot and lined up with the screw chambers, and then use your new screws to secure it to the strike plate and door frame. Before you install the new handle, make sure to measure your existing backset (the distance from the center of the large hole on the front surface of the door to the edge). Also, make sure that the size of the latch on the new handle is in line with this measurement. If you're replacing the handle or latch or handle, or if your previous lock cylinder has been damaged, then you will need a new one. If you're not replacing the locks the new latch will fit in your existing recess and will be compatible with the keys you have currently. Select a latch with rectangular cover plates to match the handles you have. Then remove the Cover Plate Door handles can begin to look worn over time However, if you replace them with a modern lever-on-rose design, it's an easy and quick DIY project to decorate and can improve the overall appearance of your home. You can buy complete sets with matching escutcheons, privacy adaptors and escutcheons. To replace an internal door handle, remove the cover plate (or rose), which covers the screws and inner mechanism. Look for a release tab on the plate and employ a flathead screwdriver remove it from the knob. It may have an opening on one edge or be held by pins. Once the cover plate is off take off the screw that holds the interior handle in place, and then set it aside. Remove the screws that hold both the outer and inner plates. You can loosen them by using a Philips Screwdriver. Take the inner plates and latch from the door. Set them aside. Most doors have a gap between the jamb of the door and the inner edge of the frame, which allows for a handle, however not all have. If it doesn't have a handle, you'll need to drill a hole in the door to install the new handle. This is the same procedure as opening a door locked however you'll have to be extra cautious not to scratch the door or frame. The installation of new door knob screws is necessary after the holes have been drilled. Make sure you purchase the same size as the previous ones, so that you won't have a handle that's too tight or loose. Installing a new strike rod and latch is also required. These are not included in most door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic alternative if you're in search of a premium interior door handle replacement set. It's factory-fitted and has received hundreds of 5-star reviews. It's a great choice for replacing worn out or damaged interior door hardware on your Chevy.