https://jsfiddle.net/beliefneed2/16f79njr/ Bi Fold Door Repairs If the hardware is damaged, it may cause problems when operating bi-fold doors. The top hinges and bottom rollers, are among the most commonly damaged components that need to be serviced or replaced. The door track can also become blocked by dust and dirt, resulting in it sticking. It is easy to solve this issue by cleaning and taking out the dirt. Fixing the hinges Bi-fold doors can open an area in a stunning way. However, they do not come without their challenges. One of the most frequent issues is when the hinges become misaligned. This could cause the door to not close properly and may also make it difficult to lock. If you're experiencing issues like these it is recommended to call a professional right away. In the absence of a problem, it can cause further damage and more expensive repair costs. It is important to leave enough room to allow the hinges to function properly when you install a bi-fold door. It is also important to read the installation manual for specifics on what clearance is required. In general, hinges should to be at least a half-inch away from the wall to allow enough clearance. If your bifold door isn't closing properly it could be due to the hinges aren't aligned correctly. This is a common problem particularly when the doors were installed by a professional. To fix this you can make use of pliers and a screwdriver to remove the pins and anchors that are holding the hinge in place. After removing the anchor pins or pivot pins, you can replace them with pins that are slightly larger. Depending on the size of the replacement pins you may need to drill a hole in the wood to accommodate them. After the new pins are installed you can replace the anchor pins or pivot pins. Test the door to ensure it opens and closes correctly. The pivot pin on the bottom could also loosen in its location and cause bifold doors to malfunction. The weight of the doors is to blame. If you have a large