https://www.repairmywindowsanddoors.co.uk/wickford-guttering-and-downpipes-near-me/ Rainwater Downpipe Repair A variety of factors can cause a rainwater downpipe to be damaged. The most common cause is heavy rainfall. the build-up of debris, trees nearby or ladders that are leaning against it, this portion of your drainage system may be prone to damage. Water stains on exterior walls and dampness are indications of blocked downpipes that need repair to avoid future issues. Many repairs to downpipes can be done by yourself. Eliminate the blockage A clogged drainpipe is more than just a nuisance. It can cause water damage to your walls, roof, and foundation. It also contributes to the development of mold in your home. In some instances it may even overflow and flood your property. It is essential to remove any obstructions as quickly as you can. You can often solve minor obstructions to your downpipe with a little elbow grease and some household items. Before you attempt to remove the blockage, make sure you're working in a safe manner by securing a sturdy ladder on a flat ground and wearing thick gloves. It's important to be aware of any electrical wires that may be around your gutters and downpipes. Make sure to identify the obstruction visually. Sometimes leaves, twigs, and other debris can get stuck in the downpipe's opening, or near the pipe's top. If you are able to identify the source and you are unable to find the culprit, try using a length of wire that has one end bent into the shape of a hook to pull the offending material out of the downpipe. Then flush the downpipe using buckets of water that is clean to remove any remaining gunk and check if the pipe is now fully unblocked. A garden hose could be helpful in removing obstructions near the downpipe's opening. A strong stream can be used to remove gunk from the corners and bends, particularly if your downpipes are made of cast iron. If the blockage is more stubborn, use drain rods or a plumbing snake to pok