https://www.selleckchem.com/ Electrospun poly(vinylidene fluoride) (PVDF) fiber membranes doped with different ionic liquids (ILs) and sharing the same anion were produced and their potential as separator membranes for battery applications was evaluated. Different types of ILs containing the same anion, bis(trifluoromethylsulfonyl)imide [TFSI]-, were used with IL concentrations ranging between 0 and 15 wt% The morphology, microstructure, thermal and electrical properties (ionic conductivity and electrochemical window) of the membranes were evaluated. The presence of ILs in the PVDF polymer matrix influences the fiber diameter and the content of the polar β phase within the polymer, as well as the degree of crystallinity. The thermal stability of the membranes decreases with the incorporation of IL. Impedance spectroscopy tests show a maximum ionic conductivity of 2.8 mS.cm-1 for 15% of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Emim][TFSI]) at room temperature. The electrochemical stability of the samples ranges from 0.0 to 6.0 V. When evaluated as battery separator membranes in C-LiFePO4 half-cells, a maximum discharge capacity of 119 mAh.g-1 at C-rate was obtained for the PVDF membrane with 15% [Emim][TFSI], with a coulombic efficiency close to 100%. The results demonstrate that the produced electrospun membranes are suitable for applications as separators for lithium ion batteries (LIBs).Oral delivery of protein or peptide drugs confronts several barriers, the intestinal epithelium and the mucus barrier on the gastrointestinal tract is deemed to be the toughest obstacles. However, overcoming these two obstacles requires contradictory surface properties of a nanocarrier. In the present work, mesoporous silica nanoparticles (MSNs) were modified with deoxycholic acid (DC) and coated with sulfobetaine 12 (SB12) for the first time to achieve both improved mucus permeation and transepithelial absorption. MSNs modified with stearic acid and coated w