Upvc Door Lock Replacements It is possible to replace your upvc door lock due to a variety of reasons. It could be because you've lost your keys or the barrel has been damaged. It's important to get your replacement for your upvc lock completed by a professional. This will ensure that the job is done to a high standard and provides the security you require. Lock Cylinder The lock cylinder is that part of the lock that can be opened by a key. The retaining screw is what separates it from the body of the lock which houses the locking mechanisms. Standard cylinders come with a pin tumbler mechanism which is pressed by the key on one side and by the locking cam on the other. This then activates the bolt mechanism. The cylinder can be changed with another one to alter the lock's key operation, design or security level. The Euro profile cylinder is the most common type of cylinder used on uPVC door, but there are other versions like British standard or anti-snap. The primary benefits of higher security cylinders is that they utilize more sophisticated pin tumbler system as well as additional components that can help resist the methods employed by burglars such as snap guns and lock bumping. To replace the cylinder you must remove the handle from the door and then remove the screw that is used to hold it in place. Once you have done this, you can remove the lock that was in use and replace it with a new one. This process can be more difficult with older uPVC locks that are more than 20 years old however, the modern locks are constructed with stronger materials and are easily installed using the right tools. It is important to get the right size the cylinder you need for your door, otherwise you may have trouble fitting it. The dimensions are typically measured from the central point of the circular portion in the keyhole to the middle of the square spindle. This measurement is referred to as the PZ dimension. You can verify that the cylinder you've got is of the correct size by inserting it in the door lock and turning the key. If you're having difficulty turning the key, it's probably time to replace it. Some people will choose to have their uPVC doors' cylinder locks changed after a break-in or other event where the locks were damaged. Others might simply need to increase the security of their business or home. In certain situations, it might be legal to update your locks. Lock Handle Removing the barrel of a lock on a door made of Upvc is among the easiest jobs a locksmith can do. It can be completed in a matter of minutes. There are many reasons to change the locks. Your tenants may have moved out without returning the keys. You might have lost the key. To gain access to the screwhole in the backplate, you will need to take off both the handle and the cylinder from your front door. It's easy to do using the screwdriver, however, you must be careful not damage the handle or cylinder. Once you have removed the handle and cylinder, you'll have to measure the lock mechanism made of plastic in order to purchase the cylinder. The two most important measurements are the PZ and the Backset. It is best to match a new cylinder with the manufacturer of your locking mechanism made from upvc. If you can see a name on the faceplate, that is your brand. Also, the shape of the gearbox can give you a good idea of the brand. There are different types of Upvc locks, including euro cylinder locks and anti-snap euro-cylinder locks. https://www.repairmywindowsanddoors.co.uk/solihull-window-lock-repairs-near-me/ may appear very similar but they differ in certain ways that impact their security. For instance the anti-snap cylinder locks are more difficult to open, which means they offer a higher level of security than standard euro cylinder locks. You can buy the parts for a lock made of pvc and install them yourself as long as you know how to use a screwdriver, however, it is recommended to leave this task to the professionals. They will be able provide you with the proper parts and complete the task quickly and to a very high standard. A professional will be able repair any damage that could be caused by the process. Fixing Plates The latch can cause problems on doors made of Upvc if it's not in alignment with the strike plate. This can cause the door to bind or fail to close. This is often caused by the strike plate not being fitted to frame. To correct this, simply move the strike plate upwards or downwards until it is in alignment with the frame. Alternately, tightening hinges may aid. It is crucial not to over tighten the screws, as this could strip them. It's not as difficult as you think to locate replacement handles for upvc doors. There are many kinds of handles online. The handle type you choose must match the cylinder and keyhole on your door made of upvc. To confirm this, you should determine the distance between the keyhole and the cylinder's center and the spindle of your handle. You should also check that the spring cassette you are using is compatible. Another option to upgrade your doors made of upvc is to install a brand new lock mechanism. There are a myriad of options available including locks that are designed for use in homes to locks that are suitable for commercial applications. A majority of locks are made to be resistant to corrosive conditions and come with many different features. Fab and Fix offers a wide range of replacement handles for upvc doors and locks. They have a range of handles with different styles and colors. They are all made of top-quality materials. They are also tested to meet various security standards. They are also simple to set up. They are also inexpensive and provide excellent value for the money. Gearbox If a uPVC door lock fails, the issue tends to be limited to the gearbox, rather than the entire multipoint mechanism. This means that replacing the gearbox is a much easier job than changing the handle or barrel and it is something which any DIYer with enough skill can do without too much difficulty. The key to success when replacing a uPVC gearbox is to use the correct tools and follow the proper procedure. Providing that you have a screwdriver that is suitable and a tape measure, the process is easy and can be completed in less than an hour. Before starting, however it is important to ensure that you are using the right type of gear box for your door, and this will generally be mentioned in the description of the item. It is essential to make sure that you use a British Kite marked lock for your uPVC door, as these are equipped with the most up to date security features which protect against a variety of ways such as the latest phenomenon referred to as "lock snapping". This means that the UK government will test and certify your new lock as being high-security. Before you begin the process of changing your uPVC lock it is vital that the door is propped open or secured in a secure manner so that it is not able to close during the procedures. In the beginning, you'll need to loosen the long screw that holds the handle in place. Keep this screw in a safe location as you will need it to reattach the handle later. After you have removed the screw, you can unhook the handle and inspect the inner workings for the first time. After you have removed the old cylinder, take care to slot in the replacement cylinder. Make sure that it is flush against the barrel of the lock. Once you are happy that everything is in place, you can screw the long screw back into place and then screw the handle to its original position. A common cause for a uPVC door handle not lifting to lock is a lack of lubrication, however in some instances the issue could be due to a full mechanism failure. If you suspect this is the case, it's best to call locksmiths for the job.