Replacing Lock on uPVC Door If you want to replace the lock on your upvc door you'll first need to remove the handle and screw holes. This is generally simple to accomplish. The next step is to locate the screw that holds the lock barrel in place. The screw is typically different to the other screws, and is located on the outside of the lock faceplate. Take the Cylinder off To change the lock on your upvc doors first, you need to take off the cylinder that is currently in use. This is a easy process that can be accomplished in about 30 minutes. All you require is an ordinary screwdriver. You'll need the Euro fixing screw for the cylinder that is typically located in the edging on the inside of the door, right next to the lock cylinder. The screw should be easy to identify as it is usually different from the rest of them. Remove this screw and keep it somewhere safe. After the cylinder has been removed, you can begin working on the removal of the handle. To do this, you will need to open the door wide enough so that you can observe the inside edge of the door, as well as the side of lock faceplate. Take off the screw that connects the handle to the door using the screwdriver. Once the screw is removed you should be able to pull the handle towards you, and the rest of the mechanism will fall out of the door. If you're having trouble removing the handle from the door frame, you might have to unscrew it. This can be accomplished using a drill or screwdriver, and you'll need to be careful not to damage the screw head or cross-thread it. When you are ready to replace your cylinder, make sure that it's the right size for your door. Cylinders are measured based on two points: (a), the distance from the center of the Fixing Screw to the bottom of cylinder and (b) the distance between the hole of the keyhole and edge of the lockplate. Take the handle off If your door handle made of upvc becomes stiff, loose or floppy The good news is that this is a fairly easy problem to fix. The multipoint lock cylinder, or other internal parts within the door, in between the handle and the frame, are often the reason. It is not uncommon for Upvc locks to become worn due to the weather, heavy usage or simply ageing and this will often lead to problems with the locking mechanism or closing mechanism of the door. If the cylinder is been worn, it may be difficult to turn the key. Additionally, the lock may be stiff, which can cause the handle to droop. The cylinder can be easily replaced, and it is a straightforward process. It can be done yourself, but you will require some knowledge about the mechanism's workings. You'll need to take off the handle to be able to replace the cylinder. To accomplish this, you will need a screwdriver and tape measure. It is essential to know the exact dimensions of your existing cylinder to be able to purchase a replacement that fits. The cylinder is the element that lets you lock your door made of upvc, and it is important that you make sure you purchase the exact size. To remove the old cylinder, you will need to take off the screws that secure it. Be careful not to remove the screws, as this may make it difficult to remove them again in the future. After the screws have been removed the cylinder will slide out easily. Take off the Lock Barrel uPVC doors are made with very strong materials and are designed to ensure your home is safe and secure. They are available in different styles and colours to suit any style. These doors are also maintenance-free, and thermally efficient. However, they do have some disadvantages. The locking point, also known as a barrel lock, could get faulty in time and requires to be replaced. It's a straightforward process, but you should be aware of some things before you begin. To get to the screw that holds the lock cylinder, it is have to remove the door handle. The screw is typically different in color from other screws, and is found near the keyhole on the outside of your door. Take out this screw and put it in a safe place. Slide out the handles on both sides of the door. Make sure you do this slowly and not too quickly as it could damage your uPVC door. After you have removed the handles and removing the handles, you can use a screwdriver to take out the screws that secure the handles to the door frame. This will enable you to better access the pins that hold the cylinder in position. After that, you can try wriggling and pulling the device to see if the cylinder becomes loose. If it does, pull it towards you, then pull it out of the socket. Once https://www.repairmywindowsanddoors.co.uk/birmingham-window-lock-repairs-near-me/ have removed the old lock cylinder it is important to replace it with a brand new one that has anti-snap and anti-bump security. It is best to have a professional locksmith do this for you, but you can do it yourself with the appropriate tools. This is a simple task that should take no more than five minutes. Install the New Cylinder A upvc lock may be damaged or broken in a variety of different ways. For instance, the cylinder may have become damaged or no longer work as it should. Whatever the reason behind changing your door lock made of upvc, it is important that you choose the right size replacement. This is because if an incorrect one is installed it could result in your upvc door being more susceptible to a method known as "lock snapping", which is responsible for 25 per cent of burglaries. It is essential to put in the right cylinder. The process is easy and takes just five minutes. To change the handle faceplate and the cylinder, you will need to remove the screws attached to them. Before you get started, make sure that the handle is opened and that you have full access to the inside edge of the door and the side of the handle faceplate which holds the lock cylinder. This is to ensure that you can easily disconnect the lock cylinder, without having to move the door handle and expose any internal components of the handle frame. The next step is to remove the old cylinder and measure it. You must know the overall length as well as the diameter of the cam that moves to lock and unlock the door. This will allow you to find a replacement that is the same size or even smaller. This is the most crucial part of the entire procedure. The cylinder should be flush with the handle and should not protrude more than 5mm from it. Install the Handle It is not unusual for a door lock made from upvc to stop working and this could be caused by something breaking inside the case which controls the bolts that retract into the keep or strike plate. It is often fixed by altering the Allan key that is located beneath the hinges. However, this can sometimes cause too much stress on the parts within the centre casing and it is recommended to seek out a professional. During the process of changing it is essential to have easy and quick access to both sides of the handle and having the proper tools. It is a good idea to place the door on its side to ensure that it doesn't close during the process. The first step is to loosen the screws that hold the handle in position with the screwdriver. After the screws are loose then you can remove the handle. After taking off the cylinder and the handle, it's time to install the replacement handle. Ensure that the new handle is the correct size for the cylinder you have currently and hole center. To determine the right size you need to measure the length of the spindle on the lever you currently have. Also, ensure that the screw fixing centres on the handle are the same as the screw fixing centres on your existing cylindrical cylinder and hole centre. Replacement handles from Fab and Fixed are available in a variety of styles and are built to last. They are perfect for those who wish to upgrade their Upvc handles and improve their home security. The right handle will ensure your home is safe and secure, and impossible for thieves to gain access.