Why You Should Have More Than One SAAB Replacement Key A spare key can save you a lot of time and effort. It's crucial when your key fob suddenly ceases to function. The most typical reason for an unresponsive key fob is the battery is dead. However there are many other causes as well. It could cost around PS1500 to purchase a new car key at a dealership and the job can take up to 10 days. Transponder key A transponder key is a car key with an electronic chip inside of the key fob. These chips communicate with the immobilizer in your vehicle by using radio signals. These keys are designed to stop theft by making it difficult for thieves to start the vehicle. Transponder keys can also be used to locate vehicles stolen. This is because the immobilizer sends the car's GPS when the key is inserted into it. Transponder keys are now standard in the majority of new cars. This is an excellent security measure against theft. However, older models might not have them. You can still get a transponder from an auto dealer if the car isn't equipped with one. The cost of a brand new transponder key is usually cheaper than the standard "blade" key. You can purchase a replacement key via the internet or from an auto dealer. The key must be programmed. This can be done by a locksmith or an authorized dealer. The process is only minutes and costs less than you would spend at the dealership. It's essential to have a spare key in case you misplace your original in the case of an emergency. Making an attempt to start your vehicle without a functioning key could harm the ignition system and stop it from turning back on. Key for Wired Saab owners should always have several keys for their vehicle. It's costly to add another key and requires an expert dealer with a tool that is designed for older vehicles, but it is possible to do it for less than $200 if you choose the correct parts. To get a second key, you will need a replacement case and a new transmitter+transponder, but you can find these for a lot less than the dealer charges. The batteries in these remotes could die over time. This is why it is crucial to replace them regularly however, it isn't very hard to do. You will need a small flathead and some patience. Slide the screwdriver into the slot that is in the middle of the case, then gently open it. Once the case has split open, you will be able to access the electronic components inside. The space-bar key and the shift key both have a copper cable underneath that connects the pressure pad to the electronic. It is important to remove the wire from the key, since it could block the car from acknowledging the key. The wire is also used to connect the ignition key to the key therefore, make sure you remove it prior to replacing the key. Remote key The 03-11 SAAB 9-3 is one of the most beautiful cars available however it can be an issue to operate. The key fob could be a bit fragile and the buttons could become stuck. It is easy to replace the key case. You can buy an additional case as well as a new key in most auto parts shops. You'll need a flathead screwdriver along with an additional key to take out the old electronic components. When you are removing electronic components, it is important to remove them in a gentle manner. They are easily damaged. Use a small flathead to split open the case once you've removed the electronics. Be gentle and avoid damaging the plastic. Once you've opened your case you will be clear about the battery clearly and remove it easily. The majority of Saabs come with only one key. Adding a second key requires an extra computer module (often called the CIM) as well as a new key, as well as specialized programming to convince the car that you're not trying to steal it. The cost of all this is expensive and the majority of locksmiths won't perform the task. You can do it yourself in the event that you're resourceful and lucky enough to locate the proper components at a reasonable cost. Keyless entry It's a good idea keep a spare Saab key, whether your car is equipped with an alarm or not. It's simple to duplicate the classic car key made of metal however it's much more difficult to steal a car with the newer key-fob-based immobilizer. https://www.thekeylab.co.uk/saab-car-keys/ -fashioned metal car keys don't come with security features. Modern ones have security features. The first thing to do is to remove the emergency key from the case. You'll need a screwdriver to accomplish this, so make sure that you have one. After you've removed the emergency key then you can use a flathead screwdriver to split the case open. This will give you complete access to the battery so you can replace it. Reassemble the keyfob after installing the new battery. Remember to align the parts properly and remember to include the limiters as they hold the battery in place. Once you're done you can put the key in the ignition and resynchronize it with the car. After that, you're good to go! This is a great method to save money and keep your vehicle safe from theft. Make sure the replacement battery is identical to the original, and it is labeled with a new label that is compatible with the original. Otherwise, the key won't work properly.